颚式破碎机
关键词:遂宁颚式破碎机遂宁矿山设备遂宁矿山机械
颚式破碎机
颚式破碎机是目前国际最为普遍使用的破碎机,具有破碎比大、产品粒度均匀、结构简单、维修方便等优点,分粗破和细破两种。被破碎物料的最高抗压强度为320MP。其中大中型颚式破碎机是我公司的拳头产品之一,尤其在设计和生产大型颚式破碎机方面,在国内已处于领先水平。
Jaw Crusher
Jaw crusher is widely used in the world market nowadays and has the features of the high reduction ratio, simple structure, and easy maintenance. it has two types, Primary and secondary crushers. The compressive resistance of the crushed materials is up to the 320Mpa.The large ahd medium-sized crushers are the key products in our company and stand in the front of the industry in the aspects of design and production.
性能特点:
该机破碎比大、产量高、粒度均匀、结构简单、维修方便、生产成本低等特点。
Features:
It has features like: simple structure, large crushing ratio, high output, even particles, convenient maintenance, low production cost and so on.
工作原理:
该机由电动机驱动皮带和皮带轮,通过偏心轴使动颚上下运动,当动颚下行时,定颚与动颚间夹角变小,物料被压碎达到破碎目的;当动颚上升时定颚和动颚间夹角变大,动颚板在拉杆、弹簧的作用下离开定颚板,此时已破碎物料从破碎腔下口排出。
Operating Principle:
The motor drives the belt wheel, and makes movable jaw up and down by eccentric shaft. When the movable jaw down, the angle between the fixed jaw and movable jaw gets smaller, and the materials can be crushed to reach the crushing target. When the movable jaw rises, the angle between the fixed jaw and movable jaw becomes larger. The movable jaw plate leaves the fixed jaw plate under the function of drawbar and spring, and then the crushed materials are discharged from the lower outlet of the crushing cavity.
规格与性能参数表 Specifications:
型号 |
进料口尺寸 |
最大进料尺寸 |
出料口可 |
处理能力 |
电机 |
重量 |
外型尺寸 |
PE250×400 |
250×400 |
200 |
20-50 |
5-20 |
15 |
3 |
1430×1310×1340 |
PE400×600 |
400×600 |
350 |
40-100 |
15-60 |
30-37 |
7 |
1700×1732×1652 |
PE500×750 |
500×750 |
425 |
50-100 |
45-110 |
45-55 |
12 |
2035×1920×2000 |
PE600×900 |
600×900 |
480 |
65-160 |
90-180 |
55-75 |
17 |
2290×2200×2370 |
PE750×1060 |
750×1060 |
630 |
80-140 |
122-320 |
90-110 |
29 |
2655×2301×3110 |
PE900×1200 |
900×1200 |
750 |
95-165 |
220-450 |
110-132 |
58 |
3800×3166×3045 |
PEX150×250 |
150×250 |
125 |
10-40 |
1-3 |
5.5 |
1.5 |
896×745×935 |
PEX150×750 |
150×750 |
125 |
18-48 |
5-16 |
15 |
3.8 |
1200×1500×1200 |
PEX250×750 |
250×750 |
210 |
25-60 |
15-30 |
22-30 |
5 |
1666×1546×1020 |
PEX250×1000 |
250×1000 |
210 |
25-60 |
15-50 |
30-37 |
7 |
1550×1964×1380 |
PEX250×1200 |
250×1200 |
210 |
25-60 |
20-60 |
37-45 |
8.5 |
2190×1900×1950 |